Question: What Are Examples Of Struck By Hazards?

What are the major types of caught in and caught between hazards in construction?

“Caught in-between” hazards kill workers in a variety of ways.

These include: cave-ins and other hazards of excavation work; body parts pulled into unguarded machinery; standing within the swing radius of cranes and other construction equipment; caught between equipment & fixed objects..

Are ladders allowed on scaffolding?

Scaffolding Safety Don’ts This includes any building materials or tools that you may have been using on the scaffold while you were working. … In most instances, scaffolds should be capable of supporting at least four times its maximum intended load. Don’t use boxes or ladders to increase your work height.

What type of struck by hazard would a hard hat protect you from?

Never nail into materials such as metal, knots or dense materials with a nail gun and receive training specific to the tool you are using. What type of struck-by hazard would a hard hat protect you from? Falling and flying.

What are examples of caught in or between hazards?

Caught-in or –Between hazards cause crushing injuries when a person is squeezed, caught, crushed, pinched, or compressed between two or more objects. This may include: Being crushed in equipment • Being crushed between mashing objects or a moving and stationary object • Being crushed between two or more moving objects.

How can you avoid being struck by hazards?

Use personal protective equipment to prevent being hit by falling or flying objects. Wear a hard hat, safety glasses, goggles, and face shields. Wear hearing protection when needed.

What type of hazard can cause MSDS?

Basic MSD hazardsAwkward postures,High forces exerted by workers, High repetition (and other time-related issues)Vibration,Local contact stress.Cold.

Which of the Focus Four is responsible for the most fatalities?

The leading causes of worker deaths on construction sites are referred to as OSHA’s Focus Four. They are falls, electrocution, struck-by object, and caught-in/between. These Fatal Four hazards were responsible for nearly three out of five (56 percent) construction worker deaths in 2010, BLS reports.

What can cause a caught between hazard?

According to OSHA, caught-in or – between hazards are defined as: Injuries resulting from a person being squeezed, caught, crushed, pinched, or compressed between two or more objects, or between parts of an object.

What are the 10 types of hazard?

The Top 10 Workplace Hazards and How to Prevent ThemSlips, trips, and falls. Falls from tripping over who-knows-what (uneven floor surfaces, wet floors, loose cables, etc.) … Electrical. … Fire. … Working in confined spaces. … Chemical hazards. … Biological hazards. … Asbestos. … Noise.

What are the 7 types of hazard?

What Are the Most Common Hazards in a Workplace?Biological. Biological hazards include viruses, bacteria, insects, animals, etc., that can cause adverse health impacts. … Chemical. Chemical hazards are hazardous substances that can cause harm. … Physical. … Safety. … Ergonomic. … Psychosocial.

Which of the following is an example of a struck by hazard?

There are four common struck-by hazards in construction: struck-by flying objects, struck-by falling objects, struck-by swinging objects and struck-by rolling objects.

What are the 4 hazards?

These presentations focus on the Big Four Construction Hazards – falls, electrocution, caught-in and struck-by. All training materials will cover the four hazards seen regularly on construction sites and will focus on the methods for the recognition and the prevention of these common hazards.

What is the maximum number of feet a safety net?

30 feetSafety nets must be installed as close as practicable under the surface on which employees are working, but in no case more than 30 feet below. When nets are used on bridges, the potential fall area must be unobstructed.

How do you identify a hazard?

To be sure that all hazards are found:Look at all aspects of the work and include non-routine activities such as maintenance, repair, or cleaning.Look at the physical work environment, equipment, materials, products, etc. … Include how the tasks are done.Look at injury and incident records.More items…

What is struck by hazard?

Struck-by hazards cause injuries by forcible contact or impact between a person and an object or piece of equipment. • Struck-by hazards can resemble caught-in or -between hazards.

Which of the following answer options are physical hazards?

Physical hazards include ergonomic hazards, radiation, heat and cold stress, vibration hazards, and noise hazards. Engineering controls are often used to mitigate physical hazards.

Who is capable of identifying existing and predictable hazards?

An OSHA “competent person” is defined as “one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them” [29 CFR 1926.32(f)].

What responsibilities does an employer have to ensure a safe and healthy work environment without those hazards for employees?

Employer ResponsibilitiesProvide a workplace free from serious recognized hazards and comply with standards, rules and regulations issued under the OSH Act.Examine workplace conditions to make sure they conform to applicable OSHA standards.Make sure employees have and use safe tools and equipment and properly maintain this equipment.More items…